Upgrading SDC 6.5.3 or 6.5.4 to SDC 6.5.6

Modified: 15 Mar 2016 19:21 UTC
                <table class="sectionMacro" border="0" cellpadding="5" cellspacing="0" width="100%"><tbody><tr>

This page shows you how to upgrade your SmartDataCenter software from version 6.5.3 or 6.5.4 to version 6.5.6. Do not use this procedure to upgrade from any other version of SmartDataCenter.

SmartDataCenter 6.5.5 was an internal release.

The upgrade procedure requires rebooting the head node and the compute nodes. When the head node is down, your customers will not be able to provision new machines using the Customer Portal. When the compute nodes are rebooting, customers will not be able to log into their machines.

Please read this procedure carefully before starting. Make sure that you understand all the steps you'll need to take.

In this page:

To use the commands in this page you must be logged in to the head node.
At a Glance

This page shows you how to upgrade from SmartDataCenter 6.5.3 or 6.5.4 to SmartDataCenter 6.5.6

If you are using a version of SmartDataCenter before 6.5.3 you must upgrade to 6.5.3 before following this guide

Compatibility

6.5 6.5.1 6.5.2 6.5.3 6.5.4